SSC JE Exam’s eligibility criteria, important dates, admit card exam pattern, application form and many more.

Download Documents

Title Sample File Full File
No documents found in this course.

SSC JE Exam’s eligibility criteria, important dates, admit card exam pattern, application form and many more.

The Staff Selection Commission (SSC) has recently released the notification for junior engineers for (civil, electrical, and mechanical) recruitment examination 2019. Those aspirants who are interested Join the best ssc je coaching centers in vijayawada in the ssc je they can apply for the examination. The SSC JE examination is held only once in a year. Here we are providing all the information about SSC JE Exam’s eligibility criteria, important dates, admit card exam pattern, application form and many more.

                                                        Best SSC JE Coaching Centers In Vijayawada

Eligibility Criteria:

Educational qualification: Applicants should posses a degree/diploma in Engineering from an institute recognised by the state or centre.

Age limit: Applicants should be within the age group of 18-32 years as on August 1, 2018. (Candidates born not before 02-01-1991 and not later than 01-01-2005).Top Most SSC JE Coaching Centers In Vijayawada

Registration Dates:

Notification Release Date                       :  1st February 2019

Starting Online                                        :  2nd February 2019

Last Date Online                                     :  25th February 2019 (till 5:00 PM)

Online Admit Card Pulish Date             :   September 2019

Paper - 1 Exam                                        :   23rd September 2019 to 27th September 2019

Paper - 2 Exam                                        :  29th December 2019                 

 

How to apply for SSC JE:

•    Visit the official website of SSC JE (ssconline.nic.in)
•    Click on “Apply Online”.
•    Enter registration details and click on “Submit” button.
•    Note down your login details and login again to fill the application form.
•    Click on “Fill Application” and fill all the required details.
•    Upload the scanned images of Photograph and Signature.
•    Made the fee payment by choosing DD or any other online mode.      Best SSC JE Coaching Centers In Andhra pradesh.
•    Candidates will be needed the following details & documents at the time of filling the application form:

Documents/Details Required:

•    Candidate’s personal, qualification and address details.
•    Scanned signature. Signature should be made on white paper with black ink. The image should be in jpg/jpeg format   and the image size should not              exceed 50 kb.
•    Scanned recent coloured passport size photograph, Image should be in jpg/jpeg format with 50 kb size with light background. 
•    Valid Email ID and Mobile Number.
•    Payment details.
•    Students can follow these simple steps to fill the SSC JE application form.  Top Most SSC JE Coaching Centers In Andhra pradesh

 

 

 

 

SSC - JE 2019 Syllabus:

Paper I

General Intelligence & Reasoning:

The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgment, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series, etc. The test will also include questions designed to test the candidate?s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.

General Awareness:

Questions will be aimed at testing the candidate?s general awareness of the environment around him/ her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations
and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.
 

Technical Syllabus:

Electrical:

Mechanical:

Civil:

Structural:

Paper II

Part-A (Civil & Structural Engineering):

Building Materials :

Physical and Chemical properties, classification, standard tests, uses and manufacture/ quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes. 

Estimating, Costing and Valuation:

Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson?s rule, Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and
pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying :

Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment

Soil Mechanics :

Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses Index properties of soils, Atterberg?s limits, ISI soil classification and plasticity chart Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement Shear strength of soils, direct shear test, Vane shear test, Triaxial test Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test

Hydraulics :

Fluid properties, hydrostatics, measurements of flow, Bernoulli?s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines 

Irrigation Engineering:

Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc Water requirement of crops, duty, delta and base
period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation  16 efficiencies Different type of canals, types of canal irrigation, loss of water in canals Canal lining – types and advantages Shallow and deep to wells, yield from a well Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy?s theory of critical velocity Lacey?s theory of uniform flow Definition of flood, causes and effects, methods of flood control, water logging, preventive measure Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes Major irrigation projects in India 

Transportation Engineering:

Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards
Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety

Environmental Engineering:

Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments Surface water drainage Solid waste management – types, effects, engineered management system Air pollution – pollutants, causes, effects, control Noise pollution – cause, health effects, control

Structural Engineering:

Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams Moment of area and moment of inertia for rectangular & circular sections, bending
moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section

Concrete Technology:

Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures

RCC Design:

RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams T-beams, lintels One way and two way slabs, is olated footings Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods)

Steel Design:

Steel design and construction of steel columns, beams roof trusses plate girders

Part-B (Electrical Engineering):

Basic concepts :

Concepts of resistance, inductance, capacitance, and various factors affecting them Concepts of current, voltage, power, energy and their units

Circuit law : Kirchhoff?s law, Simple Circuit solution using network theorems

Magnetic Circuit :

Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration eg straight, circular, solenoidal, etc Electromagnetic induction, self and mutual induction

AC Fundamentals:

Instantaneous, peak, RMS and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of RL and C, Resonance, Tank Circuit Poly Phase system – star and delta connection, 3 phase power,  DC and sinusoidal response of R-Land R-C circuit

Measurement and measuring instruments:

Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement Measurement  of frequency and phase angle Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges Use of CRO,  Signal Generator, CT, PT and their uses Earth Fault detection

Electrical Machines :

(a) DC Machine – Construction, Basic Principles of DC motors and generators, their characteristics, speed control and starting of DC Motors Method of braking motor,  Losses and efficiency of DC Machines (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, OC and SC Tests, Losses and efficiency Effect  of voltage, frequency and wave form on losses Parallel operation of 1 phase /3 phase  transformers Auto transformers (c) 3 phase induction motors, rotating magnetic field, principle of operation,  equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors  Methods of braking, effect of voltage and frequency variation on torque speed characteristics

Fractional Kilowatt Motors and Single Phase Induction Motors:

Characteristics and applications

Synchronous Machines - Generation of 3-phase emf armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power Starting and applications of synchronous motors

Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, HRC Fuses, Protection against earth leakage / over current, etc Buchholtz relay, Merz-Price system of  protection of generators & transformers, protection of feeders and bus bars Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system Cable – Different type of cables, cable rating and derating factor

Estimation and costing :

Estimation of lighting scheme, electric installation of machines and relevant IE rules Earthing practices and IE Rules

Utilization of Electrical Energy :

Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors

Basic Electronics :

Working of various electronic devices eg P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET Simple circuits using these devices

Part- C (Mechanical Engineering):

Theory of Machines and Machine Design

Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch,  Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots

Engineering Mechanics and Strength of Materials

Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler?s and Rankin?s theories, Thin walled pressure vessels

Thermal Engineering

Properties of Pure Substances :

p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status Definition of dryness fraction of steam, degree of superheat of steam H-s chart of steam (Mollier?s Chart)

1st Law of Thermodynamics :

Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation

2nd Law of Thermodynamics :

Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation  of ideal gas processes Carnot Cycle & Carnot Efficiency, PMM-2; definition & itsimpossibility

Air standard Cycles for IC engines :

Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency

IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication

Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work

Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers

Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines

Fluid Mechanics & Machinery

Properties & Classification of Fluid : ideal & real fluids, Newton?s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids

Fluid Statics: Pressure at a point

Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube

Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation

Dynamics of ideal fluids: Bernoulli?s equation, Total head; Velocity head; Pressure head; Application of Bernoulli?s equitation

Measurement of Flow rate Basic Principles: Venturimeter, Pilot tube, Orifice meter

Hydraulic Turbines: Classifications, Principles

Centrifugal Pumps: Classifications, Principles, Performance

Production Engineering : 

Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques ie TIG, MIG, etc (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic  Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.

SSC - JE 2019 Exam Pattern:

Paper - I Exam Pattern 

 

 

 

 

 

Paper - II Exam Pattern